1) Turn off the power switch on the touch screen, at this time the system will stop heating each heater, and automatically turn off after a delay of a period of time (generally 30s) under the program setting to avoid the hot air generator burning out;
2) Note: When manually stopping, control the cup mold to stop between the two hot air heads to prevent the cup mold from being baked;
3) Cut off all power switches on the machine, close the air valve and drain the residual compressed air in the air pipe;
4) Do a good job of cleaning the machine according to the cleaning requirements;
5) Collect the unused pieces of cup paper and put them away.