Mechanical Quality Guarantee

1. Mechanical parts are guaranteed for 5 years, electrical parts and vulnerable parts are guaranteed for 1 year.

2. All parts on forming table are easy to access for maintenance.

3. All parts under forming table are lubricated by oil bath. Oil should be changed every 4-6 months with specified oil.

Production Efficiency

1. Production output up to 38,000 cups per shift (8 hours), up to 3 million cups per month (3 shifts); The capacity of different sleeve type varies, the above data is for reference only.

2. Percentage of pass is higher than 99% under normal production.

3. One operator can handle several machines at the same time.

Mechanical Behavior

NEWTOP-118DT double wall paper cup sleeve machine adopts open-type, intermittent division design, gear drive, longitudinal axis design, so they can reasonably distribute each part function. The whole machine adopts spray lubrication. PLC system controls the whole cups forming process. By adopting photoelectric failure-detecting system and servo control feeding, our machine's reliable performance is guaranteed, thus offering a rapid and stable operation. This plastic cup sleeve machine's maximum speed can reach 100pcs/min.The NEWTOP-118DT paper cup sleeve machine for paper sleeve is suitable for producing 8-44OZ cup jacket forming which is widely used in milk-tea cup,coffee cup, ripple cups, noodle bowl and so on.

Remark: The actual production is affected by various of factor and the data above is only for reference.

DEBAO-118DT
Weight:	2600 kg
Machine encasement dimensions:	2800 x 1300 x 2250mm
Connecting power:	380V, 5KW
Compressed air:	0.6-0.8MPa, 0.4m³/min
Production capacity:	Hollow/appressed: 120pcs/min; Corrugated: 100pcs/min; Embossing: 80pcs/min
Paper types:	White board/ Grey board/ Corrugated board
Paper thickness:	0.2825-0.4075mm
Product range:	(D1) ф70-95mm (H) 60-135mm (D2) ф50-75mm (h) 5-12mm
Long term magazine:	○
Control panel:	7 inches