High Speed Intelligent Paper Cup Machine NEWTOP-258S
|
1. Mechanical parts are guaranteed for 5 years, electrical parts and vulnerable parts are guaranteed for 1 year. 2. All parts on forming table are easy to access for maintenance. 3. All parts under forming table are lubricated by oil bath. Oil should be changed every 4-6 months with specified oil. |
1. Production output up to 96,000 cups per shift (8 hours), up to 7.7 million cups per month (3 shifts). 2. Percentage of pass is higher than 99% under normal production. 3. One operator can handle several machines at the same time. |
Mechanical Quality Guarantee
Production Efficiency
Mechanical Behavior
This machine is equipped with very stable characteristics, distinguishing it from vertical machines, and is a representative of the high speed of the New Debao!NEWTOP-258S horizontal type high speed intelligent paper cup machine adopts integrated layout on upper-side and lower-side of the table.The mold forming part is installed on the table, while the forming process is distributed around three independently driven turrets which are set in the way of 4-7-7 configuration. The main drive section under the table is connected by globoidal indexing cams and gears. The transmission parts are in a sealed-case and lubricated by spraying.This high speed paper cup make machine is controlled by PLC, the whole process is monitored by photoelectric sensors, feeding by sevro.The NEWTOP-258S high speed paper cup make machine achieves a maximum production speed of 260 pcs/min, suitable for producing 8-22oz paper cups for both hot and cold cups.
Remark: The actual production capacity is affected by various of factors and the data above is only for reference.
|
NEWTOP-258S |
|
|
Weight: |
7500 kg |
|
Machine encasement dimensions: |
3300 x 2140 x 2250mm |
|
Connecting power: |
Three-phase, 380V, 55KW |
|
Compressed air: |
0.5-0.7MPa, 0.5m³/min |
|
Production capacity: |
220pcs/min |
|
Paper types: |
Single PE / double PE / PLA |
|
Paper thickness: |
0.295-0.47mm |
|
Product range: |
(D1) ф60-100mm (H) 70-180mm (D2) ф50-80mm (h) 5-12mm |
|
Long term magazine: |
○ |
|
Control panel: |
10.2 inches |
| Note: optional○ standard● | |
 |
 |
 |
 |
Send Inquiry
